Resumen Antecedentes: La suplementación de cerdos con ractopamina (RAC) es una estrategia para aumentar la eficiencia productiva en ceba. Objetivo: Evaluar el efecto de diferentes planes de suplementación con RAC en dietas de cerdos en ceba sobre el rendimiento productivo, características de la canal, eficiencia de utilización de lisina (ELU) y energía (EEU), y viabilidad económica. Métodos: Un total de 40 machos castrados (74,75 ± 5,22 kg) fueron alimentados con cuatro niveles de RAC (0, 5, 10 y 5-10 mg/kg de plano escalonado) de 0-14, 15-31 y 0-31 días. Se evaluó el rendimiento, características de la canal, ELU, EEU, el costo por unidad de ganancia de peso (CWG), los tipos de pago y ganancias. Los animales se distribuyeron en un diseño completamente aleatorizado en cuatro tratamientos, con diez repeticiones por tratamiento. La unidad experimental fue cada animal. Resultados: Los animales suplementados con RAC tuvieron mayor peso corporal a los 14 y 31 días, ganancia de peso diaria (ADG) de 0-14 y 0-31 días, ELU de 0-14 días y peso de la canal caliente en comparación con el grupo control. En comparación con la concentración de 10 mg/kg de RAC, el plano escalonado resultó en un aumento de peso corporal, conversión alimenticia (FGR), ADG, ELU, EEU y CWG a los 0-14 días. El pago por peso y el pago por bonificación fueron mejores para los tratamientos con RAC en comparación con el control. Conclusiones: Los cerdos en ceba alimentados con RAC tienen mejor rendimiento, peso de la canal, ELU, EEU y viabilidad económica. Los resultados de los parámetros estudiados son mejores con el uso del plano escalonado en comparación con el uso continuo de 10 mg/kg de RAC.

Abstract Background: Ractopamine (RAC) supplementation in the feed has been evaluated as a strategy to increase productive efficiency in finishing pigs. Objective: To evaluate the effects of different RAC dietary levels on performance, carcass traits, efficiency of lysine (ELU) and energy (EEU) utilization, and economic viability in finishing pig. Methods: A total of 40 barrows (74.75 ± 5.22 kg) were fed four RAC levels (0, 5, 10 and 5-10 mg/kg step-up program) from 0-14, 15-31 and 0-31 days. Performance, carcass characteristics, ELU, EEU, cost per unit of weight gain (CWG), payment and profit parameters were measured. The animals were distributed in a completely randomized design in four treatments, with ten replicates per treatment. The experimental unit was each animal. Results: Pigs fed RAC diets showed increased body weights at 14 and 31 days, average daily gain (ADG) at 0-14 and 0-31 days, ELU at 0-14 days, and hot carcass weight as compared with those fed the control diet. The step-up program as compared to the 10 mg/kg RAC concentration resulted in increased body weight, feed/gain ratio (FGR), ADG, ELU, EEU and CWG at 0-14 days. Payment by weight and bonus payment were better for treatments with RAC as compared to control. Conclusions: Pigs fed RAC improved performance, carcass weight, ELU, EEU and economic viability. The results were better for the step-up program compared with the intermittent use of 10 mg/kg RAC.

Resumo Antecedentes: Suplementação de ractopamina (RAC) em dietas para suínos foi avaliada como uma estratégia para aumentar eficiência de produção de suínos em terminação. Objetivo: Avaliar os efeitos de diferentes planos de suplementação de RAC em dietas para suínos em terminação sobre o desempenho, características de carcaça, eficiência de utilização de lisina (ELU) e energia (EEU), e viabilidade econômica. Métodos: Um total de 40 machos castrados (74.75 ± 5.22 kg) foram alimentados com quatro níveis de RAC (0, 5, 10 e 5-10 mg/kg plano escalonado) em 0-14, 15-31 e 0-31 dias. Desempenho, características de carcaça, ELU, EEU, custo por unidade de ganho de peso (CWG), tipos de pagamento e lucro foram mensurados. Os animais foram distribuídos em um delineamento inteiramente casualizado em quatro tratamentos, dez repetições para cada tratamento. A unidade experimental foi cada animal. Resultados: Os animais alimentados com dietas contendo RAC mostraram aumento de peso corporal aos 14 e 31 dias, ganho de peso diário (ADG) de 0-14 e 0-31 dias, ELU de 0-14 dias e peso de carcaça quente comparado ao grupo controle. O plano escalonado comparado ao nível de 10 mg/kg de RAC mostrou maior peso corporal, conversão alimentar (FGR), ADG, ELU, EEU e CWG de 0-14 dias. Pagamento por peso e pagamento por bonificação foram melhor para tratamentos com RAC em comparação ao controle. Conclusões: Suínos alimentados com RAC mostram melhor desempenho, peso de carcaça, ELU, EEU e viabilidade econômica. Os resultados dos parâmetros estudados foram melhores com uso do plano escalonado quando comparado com uso constante de 10 mg/kg de RAC para suínos em terminação.

Resumen Antecedentes: la suplementación dietaria con fósforo ayuda a mantener la integridad del hueso y prevenir fracturas durante el desarrollo y sacrificio de los animales. Objetivo: evaluar el efecto de diferentes fuentes de fósforo sobre las características óseas de los cerdos. Métodos: ciento doce lechones (peso corporal: 28,65 ± 2,82 Kg) se distribuyeron en un arreglo factorial 8×2 (ocho fuentes de fósforo × dos sexos) en bloques al azar. Las dietas se formularon con base en fósforo total, con 0,32 y 0,31% de P para la dieta control y 0,56 y 0,42% de P para los otros tratamientos en las fases de crecimiento y finalización, respectivamente. El fósforo se suplementó como fosfato dicálcico (DCP), monofosfato dicálcico (MDCP), superfosfato triple (TSP), superfosfato simple (SSP), fosfato de roca Catalão (ROCK), mezcla de fuentes (MIX), ácido fosfórico (PPA) y dieta control (CTR). Resultados: no se observó interacción entre las fuentes de fósforo y el sexo en ninguno de los parámetros estudiados. El espesor del tejido compacto fue más bajo en el CTR, y diferente a las dietas que contenían DCP, MDCP y PPA, seguido por las dietas SSP, TSP y ROCK; con el mayor valor para MDCP. La porosidad del tejido compacto fue mayor para las dietas CTR y SSP. Conclusión: el uso de fuentes menos elaboradas de fósforo, tales como el fosfato de roca y superfosfato simple, fue menos efectivo que las otras fuentes en mejorar la integridad ósea de los cerdos.

Summary Background: phosphorus supplementation should help to keep bone integrity and prevent fractures during the development and slaughter of animals. Objective: to evaluate the effect of different phosphorus sources on one characteristics of pigs. Methods: one-hundred and twelve piglets (28.65 ± 2.82 Kg body weight) were distributed into an 8×2 factorial arrangement (eight sources of phosphorus × two sexes) in blocks in a completely randomized design. The diets were formulated on a total-phosphorus basis, with 0.32 and 0.31% of P for the control diet and 0.56 and 0.42% of P for the other treatments in the growth and finishing phases, respectively. Phosphorus was supplemented as dicalcium phosphate (DCP); mono-dicalcium phosphate (MDCP); triple superphosphate (TSP); single superphosphate (SSP); Catalão-rock phosphate (ROCK); a mixture of sources (MIX); phosphoric acid (PPA); and the control diet (CTR). Results: there was no interaction between phosphorus sources and sex in any of the parameters. Thickness of the compact tissue was the lowest in the CTR, differing from the diets containing DCP, MDCP, and PPA, followed by diets SSP, TSP, and ROCK, with the greatest value for MDCP. Porosity of the compact tissue was higher for the CTR and SSP diets. Conclusion: the use of less elaborate sources of phosphorus, such as rock phosphate and single superphosphate, was less effective than the other sources to improve bone integrity of pigs.

Resumo Antecedentes: a suplementação de fósforo deve manter a integridade do tecido ósseo e prevenir fraturas durante o desenvolvimento e abate dos animais. Objetivo: avaliar o efeito de diferentes fontes de fósforo sobre as características ósseas dos suínos. Métodos: cento e doze leitões com peso médio inicial de 28,65 ± 2,82 Kg foram distribuídos em esquema fatorial 8×2 (oito fontes de fósforo × dois sexos) em blocos casualizados. As dietas foram formuladas baseadas em fósforo total com 0,32 e 0,31% de P para a dieta controle e com 0,56 e 0,42% de P para os outros tratamentos nas fases de crescimento e terminação, respectivamente. O fósforo nas dietas foi suplementado com fosfato bicálcico (DCP); mono-fosfato bicálcico (MDCP); superfosfato triplo (TSP); superfosfato simples (SSP); fosfato de rocha Catalão (ROCK); uma mistura de fontes (MIX); ácido fosfórico (PPA); e a dieta controle (CTR). Resultados: não houve interação entre as fontes de fósforo e sexo dos animais para qualquer um dos parâmetros estudados. A espessura do tecido compacto é menor na CTR, diferenciando-se das dietas DCP, MDCP e PPA, seguido pelas dietas SSP, TSP e ROCK, sendo que o maior valor foi observado na dieta com MDCP. A porosidade do tecido compacto foi maior com as dietas CTR e SSP. Conclusão: o uso de fontes menos elaboradas de fósforo como superfosfato simples e fosfato de rocha foram menos eficientes do que os outros tratamentos para melhorar a integridade óssea de suínos.

Este trabalho estuda as propriedades fluorescentes e solvatocrômicas da cumarina e seus derivados visando contribuir na elucidação do comportamento do estado excitado dessas moléculas em misturas de solventes. Esta abordagem foi desenvolvida através de medidas que envolveram diferentes relações de solventes com constantes dielétricas distintas. Os máximos de excitação e emissão de fluorescência foram deslocados para o azul nas misturas com maior proporção do solvente orgânico e o deslocamento de Stokes foi menor em misturas com menor parâmetro de polaridade do solvente, Δf. A intensidade de emissão de cumarina foi extremamente sensível à polaridade e às diferentes conformações estruturais dos solventes. Estas conformações influenciaram diretamente no comportamento espectroscópico e explicam o desvio da linearidade da relação de Lippert-Mataga. A utilização de espectroscopia de fluorescência possibilita o conhecimento do comportamento destes derivados quando em diferentes ambientes, sendo de extrema importância para a identificação e caracterização desses compostos em formulações farmacêuticas.

This work studied the fluorescent and solvatochromic properties of coumarin and its derivatives aiming to contribute in the elucidation of the excited state behavior of the molecule in solvent mixtures. This approach has been developed through a set of measurements involving different solvent ratios, which present distinct dielectric constants. The excitation and fluorescence maxima were largely blue-shifted with increasing participation of the organic solvent and the Stokes shifts were unusually low in mixtures with lower solvent polarity parameter, Δf. The emission intensity of coumarin was extremely sensitive to the polarity and the different structural conformations of solvents. These results influenced the spectroscopic behavior and explain the deviation from the linearity of the Lippert-Mataga relationship. The use of fluorescence spectroscopy makes the understanding of the behavior of the systems studied when in the presence of different environments being extremely important for the identification and characterization of coumarin in different pharmaceutical formulations.

The use of artificial implants provides a palliative or permanent solution for individuals who have lost some bodily function through disease, an accident or natural wear. This functional loss can be compensated for by the use of medical devices produced from special biomaterials. Titanium alloy (Ti-6Al-4V) is a well-established primary metallic biomaterial for orthopedic implants, but the toxicity of the chemical components of this alloy has become an issue of concern. In this work, we used the MTT assay and micronucleus assay to examine the cytotoxicity and genotoxicity, respectively, of an extract obtained from this alloy. The MTT assay indicated that the mitochondrial activity and cell viability of CHO-K1 cells were unaffected by exposure to the extract. However, the micronucleus assay revealed DNA damage and an increase in micronucleus frequency at all of the concentrations tested. These results show that ions released from Ti-6Al-4V alloy can cause DNA and nuclear damage and reinforce the importance of assessing the safety of metallic medical devices constructed from biomaterials.

Several molecular methods, such as Southern blotting hybridization, Multilocus Sequence Typing, and DNA microsatellite analysis, have been employed to genotype Candida albicans. The genotype analysis allows to group strains in clades, that is, a group composed of one ancestor and its descendants. These genotype studies demonstrate that clades distribution is influenced by geographic area as well as that antifungal resistance is associated with particular clades. These findings suggested that C. albicans reproduces mainly in a clonal manner, with certain degree of DNA microevolution. Additionally, virulence factors and site of isolation have also been associated with clade specificity. The present article is a brief review about the methods used for Candida genotyping and the correlated clade systems established. Special emphasis is given to Ca3 hybridization, MLST, and Microsatellites. The present work is also focused on the phenotypic and physiological traits associated with Candida clades.

The aim of the present study was to evaluate the antifungal susceptibility profile of Trichosporon species isolated from different sources employing the Clinical and Laboratory Standards Institute (CLSI) method and E-test method. Thirty-four isolates of Trichosporon spp. and six CBS reference samples were tested for their susceptibility to Amphotericin B, 5-flucytosine, Fluconazole, Itraconazole, Voriconazole and Terbinafine. All species showed high Minimun Inhibitory Concentrations (MIC) for Itraconazole and susceptibility to Fluconazole, The comparison among the results obtained by the CLSI method and E-test revealed larger discrepancies among 5-flucytosine and Itraconazole. The present work provides epidemiological data that could influence therapeutic choices. Furthermore, the comparison between different methodologies could help to analyze results obtained by different laboratories.

This work focus on the influence of solvent on the photophysical properties of chlorophyll α and pheophytin. Both compounds are related to the photosynthesis process and are considered prototypes of photosensitizers in Photodynamic Therapy. Fluorescence measurements were developed using water/ethanol mixtures at different compositions, since both solvents could be employed in biological applications. The spectroscopic properties of these compounds undergo profound changes depending on water content in the ethanol due to auto-aggregation processes. The major hydrophobicity and the lower dielectric constant of ethanol when compared with water precluded significantly the auto-aggregation process of these compounds.

No presente estudo, o papel de diferentes centros metálicos (magnésio, zinco e cobre) sobre o caráter hidrofílico de metaloclorofilas foi avaliado. O solvatocromismo, assim como o processo de agregação para esses compostos, em misturas água/etanol foram avaliados usando medidas de fluorescência e de espalhamento de luz ressonante (ELR), visando caracterizar o comportamento desses compostos. Independente da metaloclorofila estudada, a presença de ao menos 60% de água resulta em incremento considerável na emissão de fluorescência apresentada por esses compostos. Isso, provavelmente, é uma conseqüência direta de uma menor agregação, o que é confirmado pelos resultados de ELR. Adicionalmente, os resultados sugerem que as clorofilas de magnésio e de zinco devem ser promissores agentes fototerapêuticos para emprego em Terapia Fotodinâmica.

In this study the role of different metal centers (magnesium, zinc and copper) on the enhancement of the hydrophilic character of metallochlorophylls, was evaluated. The solvatochromism as well as the aggregation process for these compounds in water/ethanol mixtures at different volume ratios were evaluated using Fluorescence, and Resonant Light Scattering (RLS) measurements, aiming to characterize the behavior of these compounds. Independently on the studied metallochlorophyll, the presence of at least 60% of water results in a considerable increase in the fluorescence emission, probably a direct consequence of a lower aggregation of these compounds, which is confirmed by the results from RLS measurements. Additionally, the results suggest that magnesium and zinc chlorophyll should be promising phototherapeutic agents for Photodynamic Therapy.

UV-Vis and fluorescence spectroscopic studies of native and reconstituted d monomers from Glossoscolex paulistus were performed in alkaline pH. In addition to the presence of aquomet and hemichrome hexacoordinated species, a pentacoordinated species occurs. This latter species, which presents an imidazolate group of axial histidine as fifth ligand, is identified by the blue-shifted low-intensity Soret band and LMCT band. The pentacoordinated species must occur due to partial polypeptide unfolding.

UV-Vis and fluorescence spectroscopic studies of the native and reconstituted d monomers of Glossoscolex paulistus were performed in acid medium. The coexistence of distinct species shows the complexity of the equilibria. Besides the hexacoordinate low spin hemichrome, with bands at 535 and 565 nm, a pentacoordinate high spin hemichrome is identified by the blue-shifted low intensity Soret band (371 nm) and the LMCT band (643 nm). The pentacoordinate hemichrome must be related to the partial unfolding of the polypeptide.

The different conformations of porphyrin rings are strongly related with the electronic configurations of the metallic center in the ferriheme coordination compounds and heme proteins. The usual electronic configuration, (d xy)²(d xz,d yz )³ presents a planar conformation of the porphyrin ring and the less common electronic configuration (d xz,d yz)4(d xy )¹ occurs in the case of a strongly ruffled ring. These states are responsible for distinct chemical and spectroscopic properties of the porphyrin systems. The importance of the ring conformations, their characteristics, implications and applications are discussed.